Wondering how to factory reset aTP link router? Well, the first thing that you need to do is back up your computer. The next step is to unplug the modem from the wall. Then get a new battery for your modem. Finally, plug in the modem into a different port on your computer.
How to factory reset aTP link router so it will work after a hard reset? The way to do it is by going through the steps that you would follow if you were to power the modem up after a hard reset. First of all, disconnect the power from the modem. After this, open up the case of your computer. You will then see two wires - one on the top and one on the bottom - that is labeled withpins.
These two wires are what connect your computer to the router. After you have done this, remove the two clips that hold the hard drive in place inside the case. Once this is done, unscrew the two screws that are located on the front of the router. The next thing that you have to do is remove the casing of the hard drive. Now you will see the two non-connectable tabs that are located on the back.
How to Factory Reset YourTPB Link Router
Now that you have taken out the hard drive, disconnect the power from your router and remove the two remaining clips that hold it in place. This is the part that you will need for the factory reset process. After this, remove the plastic trim found on the front of the modem. This trim is where the WPS button is located. You can then access the WPS button through the tabs located on the back side of the modem.
don't miss - Fusion Kodi 2021
This step is important if you want to know how to factory reset your up-link router. You need to find the WPS button on the back side of your router. You will notice that it is white with a rectangular shape. Once you have found it, press and hold the WPS button for a few seconds. If you are unable to hold it for long, you need to consider restarting your computer in safe mode.
don't miss - How To Start An Llc
After the WPS button has been pressed, release it in order to initiate the factory reset process. Your router will now be powered off. You will need to release all the other connections as well. When you have successfully completed the entire step of How To Factory Reset Tp Link Router, you will be able to turn on your wireless router again.
Next - Pros & Cons Of Auto Clickers
If you want to know how to factory reset tp link, you should consider resetting your modem as well. Some routers will need to be rebooted in order for them to work properly again. Simply connect your modem to the computer and follow the instructions provided by your manufacturer. Most routers have a user's manual that can easily help you with this process. Keep in mind that resetting your modem will erase all settings and data from your router so it will be necessary that you create a restore point before continuing.
The last step in learning how to factory reset tp link router is to reboot your computer. If you are not able to get your router to turn on, you might need to consider resetting the Wi-Fi drivers. If you are still unsure of how to reset them, you can use the manufacturer's recovery CD to troubleshoot your device. If you can't find one, you can visit a local electronic store or search the internet for instructions on resetting the drivers. You can also reset them by using the instructions provided by your manufacturer.
Thanks for reading, for more updates and blog posts about how to factory reset tp link router don't miss our blog - Mediascreationrecherche We try to update the site bi-weekly